1. This machine is designed for internal and external shaving of round tubes and round bars, and round bars can be used for chamfering.
2. The center line of the workpiece and the insert head is accurate.
3. The clamping die and the cutter head are designed to be uniform, and the workpiece can be processed uniformly at on time.
4. The cutter head is specially designed, the blade is standardized, and the adjustment tool is simple and fast.
5. Feeding by manual, automatic advance and retreat blade, fast feed, suitable for material steel pipe, iron pipe, aluminum pipe, cooper pipe, stainless steel pipe(plastic pipe, non-metal material and carbon fiber pipe).
6. The machine is randomly matched with the multiple clamp, which can be applied to different pipe diameters, saving time and cost for replacing the clamp.
a. Basic machine
b. Pneumatic type
c. Electrical control system
d. Standard insert head*1 pc
e. Insert holder (one each of inner, outer and facing)
f. Insert(one each of inner, outer and facing）
g. Multiple clamp*1 set
i. Cutting oil spray system
a. Custom insert head
b. Multiple clamp
c. Special insert holder
d. R angle insert
A:5 HP 2 P
B:5HP 4 P
C: 3HP 6P
|2 HP||2 HP|
A: 6P-575/1035 rpm
B: 8P-430/775 rpm
|Working Pressure||6-8 kg/cm2||6-8 kg/cm2||6-8 kg/cm2|
Standard insert head-16-180mm
Small insert head-10-50mm
|Pipe OD||10-180 mm||38-330 mm||38-330 mm|
|Clamp motor||-||1/4 HP||1/4 HP|
|Feed motor||-||-||1/4 HP|
|Machine Dimensions(mm)||855x747x1226 mm||1050x1400x1500 mm||1050x1400x1500 mm|
|Machine Weight(kg)||280 kgs||1250 kgs||1250 kgs|