No.88, Sec. 2, Fencao Rd., Fenyuan Township, Changhua County 502, Taiwan
1. This machine is designed for internal and external shaving of round tubes and round bars, and round bars can be used for chamfering.
2. The center line of the workpiece and the insert head is accurate.
3. The clamping die and the cutter head are designed to be uniform, and the workpiece can be processed uniformly at on time.
4. The cutter head is specially designed, the blade is standardized, and the adjustment tool is simple and fast.
5. Feeding by manual, automatic advance and retreat blade, fast feed, suitable for material steel pipe, iron pipe, aluminum pipe, cooper pipe, stainless steel pipe.
a. Basic machine
b. Pneumatic type
c. Electrical control system
d. Standard insert head*1 pc
e. Insert holder (one each of inner, outer and facing)
f. Insert(one each of inner, outer and facing）
g. Clamp*1 set
i. Cutting oil spray system
a. Custom insert head
b. Clamp of custom size (only for C-60-2A & C-80-2A)
c. Special insert holder
d. R angle insert
|Motor||1 HP 4 P||2 HP 4P||5 HP 6P|
A: 2P-3100/1550 rpm
B: 4P-1550/860 rpm
|Working Pressure||6-8 kg/cm2||6-8 kg/cm2||6-8 kg/cm2|
Standard insert head-20-60mm
Small insert head-9-18mm
Standard insert head-25-80mm
Small insert head-9-25mm
|Standard insert head 38-115mm|
|Pipe OD||9-60 mm||25-80 mm||38-120 mm|
|Machine Dimensions(mm)||780x630x850 mm||720x700x1050 mm||950x760x1350 mm|
|Machine Weight(kg)||180 kgs||200 kgs||250 kgs|