No.88, Sec. 2, Fencao Rd., Fenyuan Township, Changhua County 502, Taiwan
Put material into material tank, automatic ascending nesting, can set single or multiple to automatic unloading, automatic clamp, NC feeding to cutting material head, cutting the length required until it can't be cut, saw cutting tail to complete, fully automatic mode can e automatic unloading, release tails, continuous action.
a. Horizontal type feed, the cutting amount is great. Reduce the saw blade cost.
b. Hydraulic automatic feed(or servo motor feed) steady and fast.
c. Hidden saw blade, low noise and the security is high.
d. The automatic cooling, the saw blade is more durable, cut face smooth and no burr.
e. Clamp with two way force, top and two sides, round, square, angle tube don't need special clamp, cutting point away in min resistance point, cutting fast, high output and save cost.
f. Install saw blade overload protect device, confirm the tolerance and protect saw blade.
g. Feeding up the displacement, the material is not damaged.
h. Speed is equipped with the inverter, can be adjust required speed follow material size and thickness.
i. Feeding with high precision digital display of the speed of the valve, the feed is based on the convenience of management, double stability.
a. Basic machine
b. HSS saw blade 300x2.0x32x1 pc
c. Tool box
d. Cutting oilx1 bottle(500c.c.)
e. Feeding rack-6 meter x1 set
f. outfeed material shelf-1 meter x1 set
|Cutting Motor||5 HP|
|Cutting Speed||20-100 RPM|
|Cooling Pump||1/8 HP|
|Used Circular Saw Blade||250-400mm|
|Feeding Length||3-1000mm per time|
|Servo Motor||1 KW|
|Machine Weight(kg)||3800 kgs|