JINLING (HUNAN) INDUSTRIAL GROUP CO., LTD.
86-731-88992118

No. 9 Huaxiang Road, Changsha Economic and Technological Development Zone, Hunan Province
www.jinling.net.cn

Products

Grinding & polishing
CNC edge grinding polisher
JL-PB-2M

It is applied to the middle frame of metal parts and multi-face forming edge polishing of narrow frame parts such as sapphire, ceramics and OGS glass.



MAIN FEATURES:

The equipment is mainly composed of five parts: base, working chamber, working body, electrical control, and cover.Multi-faceted polishing for the back shell of other metal or ceramic products such as mobile phone glass and 3D mobile phone cover.

·This machine can polish the periphery of multiple pieces of sheet parts in one-time loading.

·The polished product is fixed by the clamp, fully servo driven, and polishing follows the contour of the workpiece.

·The left and right polishing heads are driven by a servo motor through a ball screw,the polishing head performs a contouring movement with respect to the polished product.

·Left and right polishing heads are driven by a geared motor with cam,the polishing head reciprocates up and down relative to the product being polished,polish the product evenly to avoid polishing lines.

·Equipment equipped with a polishing liquid spray device,the polishing liquid is evenly sprayed by the sand pump motor to the appearance of the polished product.

·Polishing head can realizes high speed rotation, left and right feed and up and down vibration polishing, polishing track diversification, evenly polished, high efficiency;The polishing body on the polishing head consists of pig hair or polished leather, the polishing effect is ideal.

·The polishing liquid tank adopts the inclined groove drainage structure, which is convenient and quick to clean.

·The installation of water and gas separation device in the working chamber can effectively save the polishing liquid and improve the working environment of workers.

·The main guiding part of the whole machine adopts precision linear guide rail to ensure the stability and sensitivity of the machine.

·The grinding bucket is cooled by double layers, which reduces the defects of the product due to high temperature.

·Three-stage filtration system to effectively separate impurities and avoid secondary scratches.

·The system has the function of product piece counting, which can easily know the equipment capacity.

·Machine adopts CNC control,intelligent settings,Simple panel and convenient operation.

Specification

設備外形尺寸[**] Equipment dimensions [L * W * H]

1720mm×1200mm×1900mm

設備重量Machine weight

1600KG

氣源壓力Air pressure

0.5Mpa-0.65Mpa

總功率Total power

5.3KW

拋光主軸非同步電機Polished spindle asynchronous motor

1.4kw 1450r/min

拋光主軸轉速Polishing spindle speed

940r/min

主軸左右推送伺服電機Spindle left and right push servo motor

0.4kw 3000 r/min

主軸左右推送速度Spindle left and right push speed

0.25m/s

產品旋轉伺服電機Product rotary servo motor

1.0KW 3000r/min

拋光產品轉速Polished product rotating speed

0.5r/s max

拋光主軸上下運動減速電機Polishing spindle up and down motion reducer

0.18KW 25r/min

拋光主軸上下運動速度Polishing spindle up and down movement speed

6/1迴圈max 6 seconds/1 cycle max

產品夾具氣缸缸徑Product fixture cylinder dia.

Φ63mm 行程20mm astroke 20mm

產品尺寸produact size

55mm×140mm×0.8mm

產能 Production capacity

 

每個夾具單次可放170片的產品,拋光週期為40分鐘, 產效為4 /分鐘。

Each piece can hold 170 pieces of product in a single pass. Polishing cycle is 40 minutes,The production efficiency is 4 pieces / minute.

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.