12YRS
TUNG PEI INDUSTRIAL CO., LTD.
886-2-27417321
886-2-27416623
10F., No.142, Sec. 4, Zhongxiao E. Rd., Da’an Dist., Taipei City 106, Taiwan
www.tpi.tw

Products

Angular Contact Ball Bearing
Standard


Design
ACBB, which is the abbreviation of angular contact ball bearings. With different contact angles, the higher axial load can be well taken care now. TPI standard ball bearings are the perfect solution for high runout accuracy applications such as machine tool main spindles.

Inner and outer rings
Standard ball bearings steel with content of carbon and chromium was selected and hardended to withstand the intense pressure between the rolling element and bearing rings.
Carbonitriding on both inner and outer rings is a basic hardening process for many TPI ball bearings suppliers. Through this special heat treatment, hardness on the raceway surface is increased; which reduces wear accordingly.
Ultra-clean steel is available in some of TPI standard ball bearings' product series now, higher wear-resistance is obtained accordingly. Since contact fatigue is often caused by hard non-metallic inclusions, bearings nowadays require exceptional levels of cleanliness.


Rolling element
High precision steel balls ensure TPI's standard ball bearings have the best precision and stability. This also reflects in bearing performance under high speed rotation.
Ceramic balls are an additional option when it comes to severe operating conditions. Extreme high speed rotation, heavy-duty applications and high heat generation while operating are some situations that ceramic balls that can definitely help.

Cage
With the highly engineered arrangement of cages, remarkable characteristics were achieved.

T1 cage, desinged for the requirement of high RPM and stable temperature rise.
T2 cage, desinged for low noise level, however, the temperature rise in high RPM is relatively high.
T3 cage, improvement of T2 cage, it's not only applicable to high RPM operation but also remain low noise level under low RPM.

Non-contact seal
Seal
The non-contact seal was well designed by TPI roller bearing company to effectively reduce the external dust entering in standard ball bearings while rotating.

Non-contact seal provides general protection for the bearings. It cannot prevent liquid contamination from getting into standard ball bearings. Torque and limiting speeds are the same as the open type.

Grease
Selecting the most suitable grease for angular contact ball bearings requires experience and expertise. With years of experience cooperating with the best grease manufacturers, TPI is able to provide the perfect bearing with most suitable grease our customer.


Life
Bearing life is usually expressed as the number of hours an individual bearing will operate before material fatigue develops on either the raceways or the rolling element. The usual life rating for industrial applications is called “L10” life. The L10 life is the number of hours which that 90% of bearings will survive; or, conversely, 10% of bearings will have failed in the L10 number of service hours.

Specification

Preload / Rigidity

System rigidity, one of the main factors of productivity and accuracy when it comes to machine tools and other precision applications. By preloading the bearings, it becomes extremely rigid and the magnitude of elastic deformation becomes neglectable.

proimages/pro/angular_contact_ball_bearing/standard/preload-rigidity.png

proimages/pro/angular_contact_ball_bearing/standard/arrangement.png

Arrangement

Standard ball bearings in duplex arrangements vary in combintations of two, three or four, in accordance to user's required specifications.
Back-to-back duplex (DB) arrangement and face-to-face duplex (DF) arrangement can both sustain radial and axial loads in both directions. The wider distance between the effective load centers of the DB arrangement allows larger moment loads to be handled.

 

Designation

The designation indicates the form, size, precision, internal structure, etc. of the bearing, and it's shown as below:

proimages/pro/angular_contact_ball_bearing/ACBB-designations.png

Ball material 5S1-  Si3N4 (Ceramic ball)
Blank SUJ2 (Steel ball)
Bearing type 7 Single-row angular contact ball bearing
HS  High speed angular contact ball bearing
BT  High speed angular contact thrust ball bearing
Diameter symbol 9  
0
2
3
Bore number 6 - 26 below number 03
00: 10mm
01: 12mm
02: 15mm
03: 17mm
above number 04
bore number x5 mm
Contact angle 15°
CE1  18°
AD  25°
30°
40°
Cage symbol T1  Phenolic machined cage
T2  Engineering plastic molded cage
T3  Engineering plastic molded cage
Bearing arrangement DB  Back to back arrangement
DF  Face to face arrangement
DT  Tandem arrangement
DBT  Tandem and back to back (triple-row)
DTBT  Tandem and back to back (quad-row)
Flush grinding Flush ground type
Blank Without flush ground
Preload GL  Light preload
GN  Normal preload
GM  Medium preload
GH  Heavy preload
GXX  Special preload
Accuracy P5  JIS standard class 5
P4  JIS standard class 4
P4X  JIS standard class 4, Special bore and outside diameter tolerance
P42  JIS standard class 4 (dimensional)、 JIS standard class 2 (running accuracy)
P2  JIS standard class 2

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.