TAIWAN YUN LIN ELECTRONIC CO., LTD.
886-4-8381860
886-4-8381915
No.361-1, Sec. 1, Shanjiao Rd., Yuanlin Township, Changhua County 51062, Taiwan
www.g-apex.com.twProducts
Marking Systems
135℃ TMS - Release Liner Heat Shrink Sleeve
135℃ TMS
Applications:
Made of flame retardant polyolefin, it is a heat shrinkable tubing specially designed for wire and cable marking. TMS has extremely flexible and thin wall characteristics, convenient for label printers to print directly, and the printing effect is permanent and legible.
Approvals / Specifications:
UL224 File no. E255532, 125˚C VW-1
AMS-DTL-23053/5 class 1, SAE-AS81531, MIL-STD-202
Operating Temperature Range:
Continuous operating temperature: -55˚C~135˚C
Minimum shrink temperature: 70˚C
Full recovery temperature: Above 110˚C
Color:
yellow
white
yellow, white other color on request.
Special size, cut pieces are available on request.
Specification
Characteristics
- Shrink ratio: 3:1
- Flexible, flame retardant
- Abrasion and chemical resistance
- Reliable physical, chemical and electrical performance
- The heat shrinkable tubing can be pre-cut with dotted lines for tearing off easily.
- Flat tubes offer ease of printing
Specification
| Part Number | Nominal Size | As supplied (mm) | After recovered (mm) | Packing (PCS/BOX) | |
|---|---|---|---|---|---|
| mm | inch | I.D.(min) | I.D.(max) | ||
| TMS1353X0024 | 2.4 | 3/32 | 2.4 | 0.8 | 250 |
| TMS1353X0032 | 3.2 | 1/8 | 3.2 | 1.1 | 250 |
| TMS1353X0048 | 4.8 | 3/16 | 4.8 | 1.6 | 250 |
| TMS1353X0064 | 6.4 | 1/4 | 6.4 | 2.1 | 250 |
| TMS1353X0095 | 9.5 | 3/8 | 9.5 | 3.2 | 250 |
| TMS1353X0127 | 12.7 | 1/2 | 12.7 | 4.2 | 250 |
| TMS1353X0191 | 19.1 | 3/4 | 19.1 | 6.3 | 250 |
| TMS1353X0254 | 25.4 | 1 | 25.4 | 8.5 | 250 |
Technical
| Property | Specification Requirement | Test Method | Typical Value |
|---|---|---|---|
| Longitudinal change | ≤10% | ASTM D2671 | ≤5% |
| Tensile strength | ≥10.3MPa | ASTM D2671 | ≥12MPa |
| Elongation at break | ≥200% | ASTM D2671 | ≥400% |
| Elongation at break after aging | ≥100% | ASTM D2671 (175˚C/168 hrs) | ≥400% |
| Heat shock | No cracking | ASTM D2671 | No cracking |
| Low temperature flexibility | No cracking | ASTM D2671 (-55˚C/4 hrs) | No cracking |
| Dielectric voltage withstand | AC2500V/60S No breakdown | ASTM D2671 | No breakdown |
| Dielectric strength | ≥19.7kV/mm | ASTM D2671 | ≥25kV/mm |
| Volume resistivity | ≥1014Ω‧cm | ASTM D2671 | ≥1014Ω‧cm |
| Copper corrosion | No corrosion | ASTM D2671 | No corrosion |
| Print performance | Print legible after 50 rubs Print legible after 30 strokes |
SAE AS81531 MIL-STD-202 | Pass |
| Fluid resistance | Print legible | SAE AS81531 (23˚C/24 hrs) | Pass |
| Flammability | VW-1 | UL224 | Pass |
