CHUNG DING DIAMOND TOOLS CO., LTD.
886-4-2567 4488
886-4-2567 8267
No.24-9, Ln. 7, Dalin Rd., Daya Dist., Taichung City 428, Taiwan (R.O.C.)
www.cdcdia.com.tw

Products

Single crystal diamond
Single Crystal Diamond-Finishing Tools
001

Single crystal diamond is divided into natural diamond (Diamond National) and man-made single crystal diamond (Crystal Diamond MONO).

Natural diamond is a gift of nature, while artificial single crystal diamond is in the high pressure (50000 ATM) high temperature (1300 degrees C) under the state
thermal conductivity

Single crystal diamond has excellent thermal conductivity, but with the temperature rise, its thermal conductivity also began to decline.

If at 50, its thermal conductivity is 4 times the silver; if the temperature rises to 100 degrees Celsius, the heat conductivity is 3 times the silver.

Rupture strength

The Hertz test with 5 m/m radius diamond probe contact to the surface of the measured object, and then test pressure.

The advantage of the Hertz test is that the test results are not subject to the size or shape of the test object.

According to the experimental data, the nitrogen content in the single crystal is increased, and the strength of diamond decreases.

hardness

Diamonds are the highest hardness of known substances on earth. As shown on the left, the nitrogen content increased, diamond hardness decreased!

But the nitrogen content increased to 1000ppm, the hardness but a substantial increase.

On the contrary, the nitrogen content of artificial single crystal is controlled between 10~100ppm, its hardness variation is smaller, so the quality is more consistent.
Industrial use

At present, the production of natural diamond in the world is declining year by year, and the annual output of natural diamond has been applied in industry for 95% yearly,

Such as wire, die tool, heat dissipation material, so the artificial single crystal diamond came into being, through continuous improvement,

The physical properties and stability of man-made single crystals have been gradually replaced by natural diamond.

Specification

Names

Single Crystal Diamond-Finishing Tools

Materials

Non-ferrous, such as Gold, Aluminum, Copper Acrylic Sheet and SUS

Hardness

HV8000~12000

Property

Hardness, Thermal Conductivity, Wear Resistant

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.