2YRS
JINN FA MACHINE INDUSTRIAL CO., LTD.
886-4-7792211
886-4-7793386
No.12, Hengzun Ln., Fusing Township, Changhua County 50643, Taiwan
www.jinnfa.comProducts
SWISS TYPE SLIDING HEAD CNC LATHE
JSL-42ABY
JSL-42ABY
-
Max. Turning Diameter 42mm.
-
Both guide bush / Non guide bush are available for making complicated components.
-
With hydraulic chuck system on main spindle, it accepted poor tolerance bar to save the material cost.
-
Deep hole drilling on sub spindle side with center cooling system. It has both fixed and rotary type.
-
The tooling system has two Y axis and Cs axis. Totally there are 37 tool holders and 19 of them are living tool.
-
Cross and face drilling function are available on main and sub spindle.
-
Built-in spindle with oil cooling system offers high efficiency, low noise and high accuracy environment.
Specification
| ITEM | UNIT | JSL-42ABY |
|---|---|---|
| Main spindle max. turning diameter | mm | 42 |
| Sub spindle max. turning diameter | mm | 42 |
| Max. turning length | mm | Rotary guide bush:200 Non guide bush:125 |
| Main spindle max. drilling diameter | mm | 30 |
| Sub spindle max. drilling diameter | mm | 30 |
| Main spindle max. tapping diameter | mm | M16 |
| Sub spindle max. tapping diameter | mm | M16 |
| Max. cross drilling diameter | mm | 13 |
| Max. cross tapping diameter | mm | M10 |
| External tool holder | pcs | 6 |
| Inner tool holder | pcs | 5 |
| Cross drilling tool holder | pcs | 4 (5) |
| Sub spindle external tool holder | pcs | 4 |
| Sub spindle inner tool holder | pcs | 3 |
| Sub spindle cross drill tool holder | pcs | 4 |
| Sub spindle face drill tool holder | pcs | 4 |
| Tool size (LxWxH) | mm | 20 x 20 x 95 ~ 155 |
| Control axis | pcs | C1/(C2)/X1/Y1/Z1/X2/Y2/Z2 |
| Main spindle bore | mm | 58 |
| Main spindle speed | rpm | 15 ~ 6000 |
| Sub spindle bore | mm | 56 |
| Sub spindle speed | rpm | 15 ~ 6000 |
| X / Z / Y-axis rapid traverse | m / min | 24 |
| $1 cross drilling speed | rpm | 4000 |
| $2 face drilling speed | rpm | 3000 |
| Main spindle motor | kw | 7.5 (15) |
| Sub spindle motor | kw | 7.5 |
| X1 / Z1 motor | kw | 1.6 |
| Y1 motor | kw | 1.4 |
| $1 cross drilling motor | kw | 1.6 |
| X2 /Z2 motor | kw | 1.4 |
| Y2 motor | kw | 1.4 |
| $2 face drilling motor | kw | 1.6 |
| Hydraulic motor | kw | 0.75 |
| Coolant pump | kw | 2.3 x 2 pcs |
| Power requirement | kw | 40 |
| Lubrication capacity | L | 2 |
| Coolant tank capacity | L | 480 |
| Machine dimensions (LxWxH) | mm | 3380x2455x2155 |
| Weight | kg | 7500 |
$1:System 1 (Main spindle system)
$2:System 2 (Sub spindle system)
