This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.
To ensure best accuracy & alignment in circular path, machines are inspected by ball bar tested.
All machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.
Double nuts ballscrew
|T-slot||mm||16 x 3 x 64|
|Table load capacity||kgs||500|
|X axis travel||m/m||800|
|Y axis travel||m/m||400|
|Z axis Travel||m/m||450|
|Spindle taper||BT-40 (CAT-40)|
|Spindle speed||rpm||8000 / Op:(10000, 12000)|
|Tool storage capacity||(16)|
• Specifications and design are subject to change without notice. ( ) Options
Auto Lube System
Spindle Air Blast
Spindle Oil Cooler.
Power Source Transformer.
Armless type ATC (16T, 20T)
Arm type ATC (24T)
Coolant Thru Spindle.
ZF Gear spindle.
Screw type chip conveyor.
Belt type chip conveyor.