EQUIPTOP HITECH CORP.
886-4-25576060
886-4-25569677
No.88, Sanfeng E. Rd., Houli Dist., Taichung City 421, Taiwan
www.ffg-equiptop.comProducts
Specification
SPECIFICATIONS：
| MODEL | UNIT | ETM-510 | ETM-510APC | |
| Travel | Max. Travel Fox X Axis | mm | 510 | 510 |
| Max. Travel Fox Y Axis | mm | 400 | 360 | |
| Max. Travel Fox Z Axis | mm | 450 | 450 | |
| Spindle Nose To Table | mm | 200-650 | 160-610 | |
| Spindle | Spindle Speed | rpm | 8000; 10000(Optional)/12000(Optional)/15000(Optional) | |
| ATC System | Tool Q'ty | 只 | Arm Type 20T | Arm Type 20T |
| Max. Tool Diameter | mm | 65 | 65 | |
| Max. Tool Length | mm | 200 | 200 | |
| Max. Tool Weight | kg | 3 | 3 | |
| Tool Shank | BT30 | BT30 | ||
| Motor | Mitsubishi/Fanuc | kw(HP) | 3.7 7.5 |
3.7, 5.5(Optional) 7.5 |
| Mitsubishi/Fanuc | kw | 1.0/1.0/3.0 1.6/1.6/3.0 |
1.0/1.0/3.0 1.6/1.6/3.0 |
|
| Table | Table Size | mm | 600x360 | (560x400)x2 |
| Max. Table Capacity | kg | 250 | 200x2 | |
| T-slot(Center x Width x No.) | mm | 100x18x3 | 100x14x5 | |
| Feed Rate | X Rapid Travel | M/mm | 48 Linear | 48 Linear |
| Y Rapid Travel | M/mm | 48 Linear | 48 Linear | |
| Z Rapid Travel | M/mm | 48 Linear | 48 Linear | |
| Cutting Feed Rate | mm/min | 1-1000 | 1-1000 | |
| Controller | Mitsubishi or Fanuc | M70/M80 or Oi-MF | M70/M80 or Oi-MF | |
| Other | Machine Weight | kg | 2800 | 4300 |
| Power Requirement | KVA | 10 | 15 | |
| Air Requirement | kg/cm2 | 6 | 6 | |
| Coolant Water | L | 200 | 130 | |
NOTE：
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown here are forreference only.
GENERAL FEATURES：
 |
 |
 |
 |
|||
| Convenient shelf for operator's equipment or work piece | Chips Wash down removal mechanism for quich cheaning | Convenient storage aera for operator's equipment | Air pressure counterweight mechanism to uplift for Z axis screw and motor | |||
 |
 |
 |
 |
|||
| A simple but efficient removal mechanism can easily move the chips to rear side of the machine | Arm type ATC 20 tools: The fast, simple and long-life automatic tool changer provide stable and reiabe tool chang | The dynamic balancing instrument calibrates the spindle displacement. Velocity and acceleration of the full speed range | Turret type ATC 12 tools:Simplified magazine construction, safety,easy maintence and trouble-free operation | |||
 |
||||||
| The full travel strok is inspected and compensated by laser measurement. The motion accuracy can be ensured |
