TUNG PEI INDUSTRIAL CO., LTD.
886-2-27417321
886-2-27416623
10F., No.142, Sec. 4, Zhongxiao E. Rd., Da’an Dist., Taipei City 106, Taiwan
www.tpi.tw

Products

Angular Contact Ball Bearing
BS/HBS Series

Design
Ball screw bearings series, shorten as BS bearings, is designed to maximize smaller ball numbers with thicker I/R & O/R and 60 degree contact angle. This design allows BS bearings have greater axial rigidity than any other TPI angular contact bearing series like standard ball bearings.
HBS bearing is designed to accommodate heavy load applications, such as plastic injection molding machines. Compare to BS bearings series, HBS bearing provides relatively higher load rating and stiffness.

Inner and outer rings
Carbonitriding on both inner and outer rings is a basic hardening process for TPI BS bearings. Through this special heat treatment, hardness on the raceway surface is increased; which reduces wear accordingly.


Rolling element
High precision steel balls ensure TPI ball bearings suppliers' BS bearings and HBS bearing have the best precision and stability. This also reflects in BS bearings performance under high speed rotation.

Cage
With the highly engineered arrangement of cages, remarkable characteristics were achieved.

T2 cage, desinged for low noise level, however, the temperature rise in high RPM is relatively high.

Seal
Contact seal, prevent dust and liquid contamination from getting into BS bearings. However, the torque will be higher and the limiting speeds will be lower under such application.
The non-contact seal provides general protection for BS bearings. It cannot prevent liquid contamination from getting into BS bearings. Torque and limiting speeds are the same as the open type.

Grease
TPI two wheeler bearings supplier cooperates with the best grease manufacturers in the world which allows us to suggest and apply the best lubricating selection for our customer.

Life
Bearing life is usually expressed as the number of hours an individual bearing will operate before material fatigue develops on either the raceways or the rolling element. The usual life rating for industrial applications is called “L10” life. The L10 life is the number of hours which that 90% of bearings will survive; or, conversely, 10% of bearings will have failed in the L10 number of service hours.

Specification

Preload / Rigidity

System rigidity, one of the main factors of productivity and accuracy when it comes to machine tools and other precision applications. By preloading the bearings, it becomes extremely rigid and the magnitude of elastic deformation becomes neglectable.

Arrangement

BS bearings and HBS bearing in duplex arrangements vary in combinations of two, three, or four, in accordance with the user's required specifications. Back-to-back duplex (DB) arrangement and face-to-face duplex (DF) arrangement can both sustain radial and axial loads in both directions. The wider distance between the effective load centers of the DB arrangement allows larger moment loads to be handled.

 

Designation

The designation indicates the form, size, precision, internal structure, etc. of the bearing, and it's shown as below:

proimages/產品命名-英文_BS系列軸承.png

Ball material Blank SUJ2 (Steel ball)
Bearing series BS Ball screw support bearing (Contact angle 60°)
Bore and outer diameter number 1747 - 100215 Shown (I.D.)mm (O.D.)mm
Matching code DB  Back to back arrangement
DF  Face to face arrangement
DT  Tandem arrangement
DBT  Tandem and back to back (triple-row)
DTBT  Tandem and back to back (quad-row)
Flush grinding Flush ground type
Blank Without flush ground
Preload codes GL  Light preload
GN  Normal preload
GM  Medium preload
Accuracy P4  JIS standard class 4
UP JIS standard UP
P4A  JIS standard class 4, Special bore and outside diameter tolerance

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.