886-4-26813864
886-4-26815055
No.13, Kung 9 Rd., Ta Chia Dist., 43769, Taichung, Taiwan
www.tjaw.com.twProducts
STANDARD MACHINE FEATURES:
Infinitely variable speed.
The band tension is cushioned.
Blade welder and grinder are front mounted for quick, accurate blade repair and installation.
Interchangeable rubber bonded saw wheels.
Brush for cleaning lower drive wheel.
Manintenance-free airpump provides air to remove chips from the point of cut.
The upper wheel could be adjusted for band tensioning.
Hand wheel controlled speed.
Adjustable saw blade guides.
Machine light is fitted.
Change speeds while the machine is in operation, without stopping, without pulley changes.
Cast iron frame to minimize machine vibration.
The machine is with a device for automatic linear cutting.
Work table may take speedy reverse movement.
Moton of work table is controlled by stepless speed controller.
Work table is with auto stoppers.
| SPECIFICATION | mm (in.) |
| Height Under Guide | 215mm 8-1/2" |
| Throat, Band to Column | 450mm 18" |
| Blade Speed | 25-117m/min 82-384ft/min |
| Blade Width | 3-15mm 1/8"-5/8" |
| Blade Length | 3570mm 140-1/2" |
| Size of Table | 565×500mm 22-1/4"×19-5/8" |
| Tilt, Main Table | 5° R, 5° L |
| Motor | 1HP |
| N0. of "T" Slots in Table | None |
| Table Stroke | 235mm 9-1/4" |
| Table Feed Operation | Electric Powered |
| Machine Size | 1030×950×1870mm 40-1/2"×37-3/8"×73-5/8" |
| Net Weight | 410kgs 902lbs |
| Ship Weight | 490kgs 1078lbs |
| Packing Size | 1130×700×2050mm 44-1/2"×27-1/2"×80-3/4" |
| STANDARD FEATURES/ACCESSORIES: | |
| Blade welder, shear, grinder, work light, blade guides, chip blower, cleaning brush, rip fence,infinitely variable speed, rubber bonded saw wheels , magnetic switches and electric powered table. | |
| OPTIONAL ACCESSORIES: | |
| 110 Volt Control & Lighting | |
