886-4-22392345
886-4-22392357
No. 530, Sec. 1, Songzhu Rd., Beitun Dist., Taichung City 40643, Taiwan
www.twspindle.comProducts
Tapping Center Spindle with Housing diameter 95.
There is 1 type for Tapping Center Spindle with Housing diameter 95, Model NO. is T3-BTS, tool holder is BT30.
Tapping Center Spindle with Housing diameter 95, T3-BTS, has the features of low inertia, high acceleration and deceleration, and synchronous tool exchanging.
Tapping Center Spindle with Housing diameter 95, Model NO. is T3-BTS which clamping type is steel ball, tool holder is BT30, Max. speed is 15000 rpm.
a. Front End Labyrinth Design with Air Seal
The tapping center spindle model has a front labyrinth with air seal, making it suitable for high speed tapping.
b. Tool Unclamping Ring with Long Life
The heat-treated tool unclamping ring prevents wear and tear failure from the high speed synchronous tool exchanging.
Specififcation Of Direct-Drive Tapping Spindle
| MODEL NO. | TOOL HOLDER | MAX. SPEED (RPM) |
NO. OF BEARINGS | CLAMPING TYPE | DIAMETER OF FRONT BEARING (MM) | OUTER DIAMETER OF HOUSING (MM) | TRAVEL FOR RECOMMENDED MACHINE TYPE |
|---|---|---|---|---|---|---|---|
| T3-BTS | BT30 | 12000 15000 18000 |
4 | steel ball | Ø 45 | Ø 95 | above 500 |
Table Of Outer Dimension Of Direct-Drive Tapping Spindle
| SERIES | MODEL NO. | L | L1 | L2 | L3 | L4 | W1 | W2 | D1 | D2 | D3 | D4 | D5 | D6 | M1 | REFERENCE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TD-95 | T3-BTS | 358 | 120 | 186 | 108 | 25 | 162 | 52 | 95 (Note 1) |
128 | 162 | 60 | 36 | 35 | 5-M8 Ø 146 (non-isometric distance) |
Diagram 2 | |
Note 1. There is no cooling groove
